Loading...
Loading...
Join the beta — full access for the first 1,000 builders
Join BetaSearch and filter 31 real business problems from workers across every industry. App ideas group related problems into buildable product concepts.
Service plumber lacks a reliable method to permanently shim a toilet so it doesn't rock over time.
Plumber needs a better method to securely anchor hose bibs on brick houses where there is no solid mounting point, currently using improvised concrete and tape.
An electrician cannot find a clean and code-compliant way to route wires from a 400A service through a 200A sub panel due to clearance constraints.
Drain height is incorrect, requiring cabinet adjustment or tailpiece extension for proper installation.
A DIY plumber needs to know if a PEX-A tub spout connection will work reliably without a shower diverter, and if a shower-only valve can be used as a tub-only valve.
Standard in-use weatherproof covers do not fit large GFCI plugs, even when shifted to the top plug position.
Large GFCI plugs (e.g., 20A pass-through) do not fit standard in-use weatherproof covers, leaving the outlet unprotected when plugged in.
Homeowner needs to redo laundry room plumbing to prevent freeze damage and upgrade to code-compliant drain, but is unsure about optimal routing, insulation, and minimizing drywall repairs.
Plumber needs to add slope to vent pipe but is constrained by existing vertical pipe and joist structure, requiring custom offset and reinforcement.
Plumber needs to connect a 1.5-inch flexipipe to a 1.25-inch male bath waste outlet in a very tight space without room for a trap.
Need to cut an outlet cover plate to fit around wall trim that wasn't accounted for during planning.
Need a specialized drain kit for a drinking fountain with non-standard plumbing connections, as standard PVC sink plumbing does not fit.
Plumber cannot confirm alignment of glued P-trap before cement sets, risking misalignment and rework.
PVC fittings are extremely difficult to push onto pipe in tight, enclosed spaces, especially for 2" diameter pipe.
Electrician needs a safe way to mount a ceiling fan box to an existing threaded pipe when knob and tube wiring is being removed without opening the ceiling or walls.
Need to connect a garbage disposal in a single drain sink with a long horizontal pipe run to a distant wall drain, unsure about optimal P-trap placement and slope requirements.
A worker cannot find clear instructions on how to properly vent an oil-burning hot water tank, especially in a mobile home setting.
Figuring out how to correctly discharge a condensate pump into a new plumbing configuration without causing code violations or future issues.
A homeowner needs to reconfigure under-sink plumbing to add a garbage disposal on the right side, but the current setup has a separate dishwasher standpipe and limited drain alignment options.
Cannot find the correct size hex nut to secure an Insinkerator HOT 250 instant hot water heater, and customer service provided incorrect information.
Sign up to save ideas, run AI analysis, and track opportunities in your personal workspace. Founding members get full access.
Join Beta