Explore Problems & App Ideas
Search and filter 23 real business problems from workers across every industry. App ideas group related problems into buildable product concepts.
App Ideas (1)
View allIndividual Problems
ComplianceSpark Electrical Maintenance Planner
A government facility electrician must build an NFPA 70B-compliant electrical maintenance program from scratch, but lacks ready-made templates and struggles with missing, outdated, or inaccurate asset data.
CodeSnap Pro
Electrician cannot install smoke/carbon detectors in hallways because returns are too close and bulkheads block placement elsewhere.
ClearanceChek
Electrician is frustrated by inconsistent clearance requirements between new and existing installations for disconnect switches and receptacles near a gas regulator and insta-hot water heater.
ClearanceQuick Pro
A contractor needs to quickly look up and apply disconnect clearance requirements between gas regulators/propane tanks and electrical equipment like generators, but cannot easily recall or access the specific distance rules.
ClearanceCheck Pro
Inspector requires proper working clearance for electrical disconnect but no tool exists to verify clearance before installation.
SubPanel RetroKit
An electrician needs to bring old 3-wire subpanels up to modern code (separate grounds and neutrals) without running a new feeder, and the customer refuses panel replacement.
CodeBox Fill Calculator
An electrical box is overcrowded, causing an inspector to fail it because it exceeds the maximum allowable current-carrying conductors.
CodeRef Pro
Electrician cannot find the NEC code reference for minimum distance between smoke detectors and air returns/vents.
BoxFill Pro
An electrician needs to fit two 14/3 cables in a standard 4-inch octagon box for smoke detector interconnections but is being told it may violate code due to box fill limits.
CertTracker Pro
Electricians and field workers lack a reliable system to track and manage multiple license and certification expiry dates, risking job loss.
CodeSnap Electrician
An electrician cannot find a clear code reference to determine when pass-through bushings are acceptable versus when clamps are required for securing cables to boxes.
CodeSnap Inspector
Inspectors and journeymen have specific expectations for cable support near boxes and bushing types, but the proper standards and product availability for pass-through bushings in remodel situations are unclear.
CodeSnap: Electrical Compliance Check
Electrician is uncertain about proper bonding and grounding practices for a GEC installation, specifically whether bonding neutral and ground creates a redundant conductor and where ground rods should terminate.
CodeClear GEC Guide
Electrician is confused and frustrated about why an uninterrupted GEC (grounding electrode conductor) needs to pass through both the meter and the panel, as it seems to create a parallel neutral path that will carry current.
CodeComply Pro
Uncertainty about whether conductors must be sized to the maximum allowable ampacity of an adjustable breaker when the breaker is set lower.
CodeCheck Pro
ESA inspector requires expansion joint for installation, but clarity on whether it's necessary is lacking.
ConduitCalc Pro
Electrical contractors need a way to determine when thermal expansion in PVC conduit exceeds 1/4 inch to comply with NEC 352.44, but there is no practical method to measure or predict this in the field.
ListCheck Pro
Electricians need to ensure their wiring installations comply with product listings and codes to avoid invalidating listings.
CodeComply Pro
A contractor needs to know whether strobes are required on smoke detectors in bedrooms for a residential renovation in Ontario, but cannot find a clear answer after days of searching through multiple codes.
CodeCheck Pro
Uncertainty about code compliance when running separate dimming cable alongside MC cable for 0-10V dimming lights.
Want to go deeper?
Sign up to save ideas, run AI analysis, and track opportunities in your personal workspace. Founding members get full access.
Join Beta