Explore Problems & App Ideas
Search and filter 194 real business problems from workers across every industry. App ideas group related problems into buildable product concepts.
App Ideas (11)
View allPlumbDecide AR
An app that helps plumbers and DIYers choose the right repair method and parts for tight-space plumbing issues using augmented reality and decision trees. It reduces guesswork and costly mistakes in complex repair scenarios.
“Plumber needs to replace a corroded P-trap but is unsure if the existing lead pipe can withstand a fernco coupling without structural damage.”
“Need to replace a 3-way valve with minimal cuts and fittings to reduce labor and parts cost.”
FixtureWrench Pro
DIYers and plumbers struggle with removing stuck cartridges, threaded pieces, and pipe sections without damaging surrounding fixtures. Existing tools are generic or unavailable for older models.
“Need to remove a threaded piece to access a shower cartridge without damaging tiles.”
“Need to replace a slow-drip section of pipe feeding a tub faucet without soldering.”
DrainConfig Pro
DIYers need a step-by-step tool to determine correct PVC fittings for sink drain reconfiguration when flex pipe is replaced, without relocating the wall pipe. This app provides a visual configurator that outputs a custom parts list and assembly instructions.
“Homeowner needs to repair a 60-year-old soldered-on hose bib without using a torch and with limited budget, but replacement stem is unavailable and cutting is not possible.”
“Unable to rethread a 1/2 galvanized pipe in place because the threading tool doesn't fit due to proximity to the wall, forcing consideration of replacing the entire line in the crawl space.”
FlangeFix Pro
DIYers and plumbers lack reliable, step-by-step guidance for tricky flange repairs (broken drains, corroded toilet flanges, cracked bowls). This app provides clear, tool-specific repair procedures to prevent damage and avoid costly replacements.
“Plumber struggles to remove a stripped set screw from a delta shower handle during cartridge replacement, risking damage to threads and needing alternative extraction methods.”
“Need to retrofit a low-pressure system but shut-off valves and flanges are glued hub to hub and sourcing new parts is slow; seeking a way to reuse existing hubs without damaging schedule 80 CPVC.”
PlumbFix Decision Guide
An app that helps homeowners and DIYers diagnose and decide on the best repair approach for non-standard plumbing issues, providing step-by-step guidance and tool recommendations.
“Unable to remove a jammed SharkBite fitting in tight space without damaging the pipe.”
“Unable to remove a leaky faucet cartridge because the stem appears stuck or integrated with other parts, and the cartridge won't fit out of the hole.”
CouplingSaver: PVC Leak Fix
Plumbers often face leaking PVC couplings in tight spaces where cutting and replacing is impossible. Current temporary fixes are unreliable, leading to callbacks and frustration.
“Need to determine if a plumbing repair using multiple strong back furncos is correct or if it would be better to replace with new pipe.”
“Service plumber finds certain complex toilet models time-consuming and difficult to service.”
Individual Problems
PlumberRepair Pro
Service plumber finds certain complex toilet models time-consuming and difficult to service.
DrainScope AR
Plumber needs to access and repair a damaged drain cleanout that was buried under pavers, requiring extra digging and risk of further damage.
PipeFix Pro
Need to determine if a plumbing repair using multiple strong back furncos is correct or if it would be better to replace with new pipe.
StackSaver WYE Tool
Replacing a WYE fitting on a 4-inch ABS stack with no margin for error is stressful and risky.
PipeFit Clearance Cutter
Need to replace a WYE fitting on a 4-inch ABS soil stack with very limited clearance above a slab, risking expensive and destructive slab demolition.
EZ-Shut Push-Fit Valve
Shutoff valves under sink fail to fully shut off water, making it impossible to replace faucets or fix leaks without turning off main water supply.
PipeSwivel Pro
Technician needs to temporarily unthread and drop the copper T&P relief line and swivel the hot service port with a union above to service a water heater, then reinstall the copper line.
PipeMate Pro
Homeowner or plumber needs to decide the best method to cut and connect cast iron drain pipe to PVC without risking joint failure.
PipeOut Pro
A plumber is unable to remove a stuck 2-inch pipe nipple and is resorting to manual hacksaw cutting from the inside, which is slow and ineffective.
Grip-Tite Packing Reseater
Difficulty reseating bonnet packing nut on old sink faucets without proper tool, causing thumb pain and frustration.
FittingSaver Precision Cutter
Removing a cast fitting without damaging existing threads is difficult and requires a risky manual cutting technique or using heat and wax to loosen corrosion.
LeverLock Reverse Thread Kit
Flush lever unscrews over time because flushing motion loosens a standard threaded connection.
PlumbSmart Assistant
A homeowner with excessive water pressure needs to install a pressure valve but lacks specific expertise on the correct valve type and installation method.
PinSeal Pro
A plumber needs a no-access repair solution for pinhole leaks in cast iron P-traps without replacement.
SewerLine DIY Reline Kit
Homeowner needs affordable, DIY-friendly options to replace aging cast iron sewer lines under a concrete slab without professional excavation or coating services.
PlumbDecide Pro
A maintenance worker cannot get clear advice on whether a threaded clean-out plug is a safe and effective replacement for a failed backwater valve in a multi-story building, risking a sewage backup geyser.
TightSpace TrapFix
Plumber lacks a clean coupling point to replace a cast iron p-trap because the trap arm enters a larger main line with minimal straight pipe.
ValveFlow Pro
Toilet tank fill valve fills too slowly after replacement, taking 2.5-3 minutes instead of 45 seconds.
PipeSeal Advisor
Homeowner needs to reseal a PVC septic clean out cap but is unsure which sealant method (PTFE tape vs. pipe joint compound) is appropriate for the application.
FixOrFudge
Disposal drain is too low for connection, requiring either a proper fix (opening wall) or a workaround, with no guidance on which to choose.
Want to go deeper?
Sign up to save ideas, run AI analysis, and track opportunities in your personal workspace. Founding members get full access.
Join Beta