Loading...
Loading...
Join the beta — full access for the first 1,000 builders
Join BetaSearch and filter 233 real business problems from workers across every industry. App ideas group related problems into buildable product concepts.
A focused app that provides step-by-step installation instructions and compatibility checks for P-traps in plumbing systems. It helps users identify correct adapters, orientation, and alignment for various drain configurations.
“Homeowner cannot align the P-trap with the tailpiece and needs a simple fix method.”
“DIYer needs to connect a modern P-trap to an old brass drain fitting but doesn't know if an adapter exists or if they need to cut and replace the fitting.”
DIYers and roofers struggle with drip edge flashing at corners and rakes, leading to leaks and damage. An app providing step-by-step AR instructions and tool recommendations can solve this.
“An incorrectly installed outside corner drip edge flashing has a large gap filled with sealant, risking water damage behind the gutter and fascia.”
“Inside corner drip edge flashing installation is difficult and often done poorly due to lack of purpose-built tools or methods.”
Roofers struggle with complex flashing details, relying on unclear diagrams and manual workarounds. An app providing interactive, step-by-step instructions for specific flashing scenarios can reduce errors and callbacks.
“There is no easy way to create a watertight flashing installation on brick sidewalls that doesn't rely on homeowners to constantly re-caulk surface-mounted metal.”
“A roofer cannot figure out how to properly install skylight flashing to prevent water intrusion, despite having a diagram from the supplier.”
An app that guides plumbers through proper PEX fitting selection, installation validation, and troubleshooting for assembly tasks. It reduces guesswork and prevents common failures in PEX connections.
“Plumber is unsure why a combination of SharkBite and PEX crimp fittings was used in a recent job, seeking validation on fitting choice for reliability and cost.”
“PEX crimp connections outdoors fail due to thermal cycling, UV exposure, or over-crimping, causing leaks in sprinkler systems.”
A simple tool and guide system for homeowners and plumbers to install valves in tight, obstructed spaces without soldering. It solves the problem of insufficient pipe length and clearance for threaded or push-fit connections.
“Plumber needs a reliable way to join PVC to galvanized drain pipe that won't break on impact.”
“Difficulties aligning and connecting threaded and slip-fit pipes of different diameters when installing a filter housing.”
An app that helps electricians plan and align outlet boxes and conduit runs before installation, reducing rework and fixing cover plate fit issues.
“Installers are unsure when expansion joints are required for conduit embedded in concrete, risking damage from freeze-thaw movement.”
“When non-specialist workers install underground conduit, it often gets buried too deep or incorrectly, forcing specialists to dig deep holes for repairs.”
Homeowner needs an under-sink tankless water heater that works on standard 120V to get hot water to a distant kitchen sink without expensive electrical work.
Leveling N-type frames on uneven ground screws is tedious and time-consuming.
Installing N-type frames on uneven ground screws is difficult due to limited adjustability.
Under-sink water line connectors require compression fittings that are not modular, making it difficult to connect and disconnect a water filter system without redoing plumbing.
Presidential TL shingles' high dimension causes flashing to sit unevenly, leaving gaps that must be dealt with via workarounds.
No good way to support a heavy PVB backflow preventer on a horizontal PVC pipe run without risking stress or long-term failure.
Threads on pop-up drain pipe are not long enough to accommodate the thickness of an old porcelain sink with overflow, making installation impossible without replacing the sink or using the original setup.
Plumbing installation challenge: how to connect a robot vacuum/mop drain line to existing plumbing while staying within manufacturer's length and height limits and complying with code.
A home owner needs to install a small restroom sink without breaking the cement floor.
Unable to install a sink in a small slab-on-grade bathroom without breaking concrete, causing additional time and cost.
An electrical worker is frustrated because a 3-phase electrical circuit was wired to a single-phase, causing a confusing and dangerous situation.
Need a 12V 3-leg relay to automatically control radiator fans triggered by the radio's remote line, replacing a manual switch that failed.
A roofer cannot figure out how to properly install skylight flashing to prevent water intrusion, despite having a diagram from the supplier.
Uncertainty about whether to install EV chargers on GFCI breakers due to cost and potential nuisance tripping issues.
Need to connect a garbage disposal in a single drain sink with a long horizontal pipe run to a distant wall drain, unsure about optimal P-trap placement and slope requirements.
Homeowner remodeling a bathroom is unsure whether adding vent pipes not required by code would prevent septic odors and save future effort of opening walls.
A DIYer needs to convert a single sink plumbing setup to a double vanity but lacks the expertise to properly configure the water supply and drain connections.
A worker cannot find clear instructions on how to properly vent an oil-burning hot water tank, especially in a mobile home setting.
An electrician needs to hang a lighted mirror on tile but is unsure whether tile mounting (which is not their trade) is included in their scope.
Need recommendations for fasteners to hang lighted mirrors on tile.
Sign up to save ideas, run AI analysis, and track opportunities in your personal workspace. Founding members get full access.
Join Beta