Plumbing

Cannot find the specific Amtrol SL86vs bladder tank model and is uncertain if the Welltrex 302 is the same product, especially for low pH water use.

Kitchen sink and laundry room share a drain line that backs up when the washing machine runs, despite repeated snaking and chemical drain cleaners.

The entire toilet seat bolt spins when trying to turn the nut, making removal difficult.

Plumber dissatisfied with the geometry and clarity of pipe routing during a plumbing installation.

Confusion about whether code-compliant pipe fitting choices (2x 22.5 elbows vs cutting a new drain hole) are allowed for a 1.5" drop between trap and vent.

Homeowner cannot remove old water line valves that feel seized or possibly soldered on, and needs a convenient DIY method to replace them.

User is struggling with the physical process of installing new ball valves in a tight, limited space and needs advice on the correct sequence and technique to fit them onto the mains water line.

Need a reliable and correct laundry drain configuration to prevent clogs, ensure proper venting, and avoid septic backup in a basement laundry setup.

Homeowner with high water pressure (82 psi) unsure whether to install a pressure regulator to protect old fixtures and appliances.

Homeowner needs advice on how to correctly update a flex line and drain assembly for a sink to achieve a straight drop.

Need an angled stop valve with a side-mounted handle to save space and allow a toilet to sit flush against the wall.

Need to add a second water line to an existing fridge water supply but cannot identify the connector type (B15AX) to find compatible parts.

Homeowner cannot identify purpose of various copper pipes in slab and needs to cap only necessary lines when removing a wet bar.

Need to find the best method and materials to permanently cap off a waste water pipe of an odd size.

Plumbing worker needs separate tool storage for soldering equipment because current single-box setup causes disorganization